318ti.org forum - View Single Post - M-Technik Door Moldings

Triple_A · 07-18-2007, 10:19 PM

Hey i was wondering if anyone had encountered any problem with those neat ///M moldings on the doors. the driver's side one on my TI just wont stay in place. this was a problem for the previous owner and he gave me some plactic braces that the sed he had to replace every so often. i was wondering if there was a permanent solution to this nagging problem. to further illustrate it looks like the nipple that lines up with the hole on the door is quite weak and doesnt not stay in the hole at all. any help is apreciated and welcome.

07-18-2007, 10:19 PM	#1
Triple_A Member Join Date: Aug 2006 Location: Chicago, IL USA Posts: 58 '98 BMW 318ti Sport iTrader: (0) Photo Gallery	M-Technik Door Moldings Hey i was wondering if anyone had encountered any problem with those neat ///M moldings on the doors. the driver's side one on my TI just wont stay in place. this was a problem for the previous owner and he gave me some plactic braces that the sed he had to replace every so often. i was wondering if there was a permanent solution to this nagging problem. to further illustrate it looks like the nipple that lines up with the hole on the door is quite weak and doesnt not stay in the hole at all. any help is apreciated and welcome.