View Single Post
Old 05-22-2011, 11:20 AM   #130
patrick1990
Junior Member
 
Join Date: Nov 2010
Location: north carolina
Posts: 7
iTrader: (0)
Thumbs up

CoolJess: Excellent write-up. I have dealt with this window nightmare ever sense buying my 97' ti, in 2009.

REGARDING ITEM "5d": A great tool to use at this stage, is an auto body 'locking-suction cup'. You know, the orange handled things, with a black rubber suction base. Using one of those can actually negate having to take the window out... at least when I've done it.
Locking-Suction-Cup.jpg

REGARDING 2B: Like you, I also used JB Weld to glue the Repair Door Panel Clips, I even used the sharpie and wrote down the numbers, BUT I did not not mark arrows pointing the proper direction the clips should go... Now, some of the clips, are permanently affixed in the wrong direction - argh!! I have been driving without a door panel (driver's side for approx 7 months, now.

LISTEN TO COOLJESS76, ON THIS ONE FOLKS. ALL OF ITEM "2B" IS SO VERY IMPORTANT!
Cheers to all,
Patrick

Last edited by roadrash; 05-23-2011 at 01:41 PM. Reason: corrected cooljess76's name
patrick1990 is offline   Reply With Quote