Rockauto might be the answer. None of the pictures looked to be the right resistor, but it seems there was an update to the part according to Rockauto. Old and the part in my car.
https://imgur.com/4EL2Eou New
https://imgur.com/fIKb17z From the images, it looks like the connector angle is wrong. I will go ahead and give the new resistor a shot. I am hoping my recently replaced blower is still in working order as well. I had to make some severe modifications to the fan blades to make it fit. I've had the best luck buying parts that somehow don't fit exactly like the original.