Quote:
Originally Posted by cbrf23 JohnBoy, These are narrowband O2s on the upstream. I already ordered all the parts from digikey. I ordered project boards from Amazon and I ordered a waterproof box and some waterproof connections from Amazon as well (so I can easily disconnect if I need to remove the ECU). I would recommend sourcing a box locally - they are a lot more expensive on Amazon. I won't have time to get to the store this week, so I ordered it so I can get this done. Also, from the documentation I have these are the expected voltages for the three conditions. This may be vehicle specific, I don't know. Just thought it worth sharing. Lambda 1 (stoichiometric) 0.45 - 0.5 volts Lambda 0.8 (lean) approx. 0.1 volts Lambda 1.2 (rich) approx. 0.9 volts |
All looks good dude. This should be a piece of cake for you since you did a good amount of reasurch and understand the concept. JohnS