Thread: m3 front bumper
View Single Post
Old 04-01-2010, 01:29 PM   #14
chrisbec
Senior Member
 
chrisbec's Avatar
 
Join Date: Apr 2009
Location: Merritt Island, FL
Posts: 351
iTrader: (1)
Default

Quote:
Originally Posted by 2MIZ129 View Post
do i really need the break ducts? and by driving lights you mean foglights?
where can i get the break ducts
Fog lights - driving lights same thing...

This is what I'm talking about.

You can buy the light assemblies (with the mounting hardware as shown in the above diagram) on ebay for around 50 bucks if you don't have them. You may also need to get number 15 (from the below diagram) these are the mounts for the driving (fog) lights. These are not in the fog light kit and they are not the same between the M3 and the ti bumpers. The aftermarket bumper that I installed didn't include these parts, you may want to double check (they are cheap).

I suppose you don't need the ducts but if you don't have them you will have some open holes in your bumper and the L/H duct holds the ambient air temp probe. Ducts are number 20 in the below diagram. They are about $20-$25 each and you can get them from pelican parts dot com.
20 FRONT LEFT BRAKE AIR DUCT M TECHNIC 51712233361
20 FRONT RIGHT BRAKE AIR DUCT M TECHNIC 51712233362
__________________
Alpine Weiß 1995 318ti
M50tu mostly stock, chip'd 413, AFE Intake. e36 M3 front brakes, e30 M3 rear calipers. e28 3.25 LSD + e30 axles. Custom stainless Magnaflow 2 in 1 out muffler.

R.I.P schwartz 1990 325is
chrisbec is offline   Reply With Quote