 supposed 95 325i swapped into a 96 ti
Ok guys I have started something that was supposed to be simple and has turned horrible. I purchased a 95 325i for a donor to swap into my 96 318ti. Swapped from clip with no problems. Wired it up, swapped dme and ews. Looked for key and realize I left it in car when I sent it to salvage. Ugh! So I though ok it a 95 dme I will just swap it with a 413 red label and be good. Wrong! After purchase and delivery of red label I realized the connector for the dme is different.( scratched my head for an hour) So here I am left with the dilemma of what to do. Asside from spending 300 to get a key cut for ews or spending 600 for a new dme/ews kit. Anyone know someone that can reprogram a MS41.1 dme? Also on the bimmer forum I found a thread that stated the chip could be desoldered from the MS41.1 and a socket installed. Question is where would i get a chip for it that doesn't have ews? Or would the 413 chip work? |