97 318ti No Crank No Start So I have a 97 318ti That I just finished a bunch of work on (pulled then engine and resealed all gaskets, performed m20 flywheel and clutch replacemen) ran great for the last couple days with no issues, then today went to start it and nothing, all dash lights and radio work, but the starter makes no noise, not even solenoid, I installed a brand new (remanufactured) starter during all the work so I doubt that it would be the starter, my EWS 2 module makes a click noise when I move the key to the "on" position, does this mean that it is accepting it? also, the previous owner wired in a VIPER security system, so I am not sure which of these two systems I should be looking at or which could be the cause. any advice or information would be nice, Thank you |