View Single Post
Old 01-30-2008, 02:52 AM   #6
dahamler
Senior Member
 
Join Date: Aug 2007
Location: Monterey, CA
Posts: 770
iTrader: (11)
Default

Removal IV



During the rush of the swap I forgot to take pictures of the actual engine being removed. But this is only a rough guide detailing my experience.

Unbolt the driveshaft from the transmission and remove the shifter from inside the car.
Disconnect and remove the exhaust and the transmission mounts. There should be two nuts (one each side)securing the engine mounts to the car. Remove the radiator and the engine should be ready to be lifted out. I only needed to raise the engine and transmission slightly and I pulled the entire unit out as one.

Last edited by dahamler; 08-01-2011 at 01:03 PM.
dahamler is offline   Reply With Quote