View Single Post
Old 04-13-2017, 07:30 PM   #4
bluoval6
Member
 
Join Date: Oct 2015
Location: Slidell, Louisiana USA
Posts: 89
iTrader: (0)
Default

Is the battery fully charged? If you have a voltmeter, check the voltage across the battery terminals while someone spins it over, or rig it up so you can watch the meter. You should stay close to 12 volts, even while cranking. If the battery is ok, check all your connections. Battery terminals, starter terminal, engine ground. Spin it for a few seconds and see if any connections are hot. Heat indicates high resistance. Hope this helps.

Scott
bluoval6 is offline   Reply With Quote