318ti.org forum - View Single Post

318_mzk2 · 12-18-2009, 08:29 PM

checking again the only wire u have to cut is pin #7 on x20 conector...usualy lime green..mine was purple...it should work after that ..otherwize ur grounds might be wrong..good luck ..

12-18-2009, 08:29 PM	#2
318_mzk2 Senior Member Join Date: Jun 2009 Location: nj Posts: 1,099 iTrader: (5) Photo Gallery	checking again the only wire u have to cut is pin #7 on x20 conector...usualy lime green..mine was purple...it should work after that ..otherwize ur grounds might be wrong..good luck ..