The e30 axles fit. The only modification needed is to the ABS sensor. You need to remove it and install a washer or two between the sensor and the hub to allow enough clearance for the larger half shaft.
Oh, you have to unbolt the bottom of the shocks to get the e30 half shafts installed. There is enough clearance to remove the TI shafts, but the shock needs to be unbolted to seat the e30 version. Once its seated and tightened up, the shock can be bolted back on. During operation, there are no clearance issues with the exception of that ABS sensor. __________________
SOLD!!! 1999 332ti //M Sport Titanium Silver
M3 S52 3.2 I-6 Engine, M3 Clutch w/ ti Getrag Trans, Z3 3.15 LSD medium case diff and half shafts, OEM Hatch Spoiler, Eurosport HP Underdrive Pulleys, FDM, 17" DS1 rims, M3 Front Struts & Springs, M3 Instrument Cluster, 3-spoke //M steering wheel with tri-color stitching, SSK, CCFL Angels in Depo projectors with 5k HIDs |