318ti.org forum - View Single Post

Bluebimma · 04-11-2008, 07:27 PM

///MCoupe/Roadster Finned Differential Mounting Plate
33-11-2-228-335-M9

///Mcoupe Differential plate mounts and aligns perfectly with Medium Case differentials. NOTE: Rear driveshaft was removed due to other complications, this is NOT required for the differential swap.

E28 Output Flange on the left, E36 Compact on the right. There is a difference in length but nothing to be worried about. You must use the E36 compact output flanges if you wish to reuse the E36 compact axles. They will NOT bolt to the E28 flanges.

04-11-2008, 07:27 PM	#5
Bluebimma Senior Member Join Date: May 2006 Location: 43609 Posts: 3,425 iTrader: (8) Photo Gallery	///MCoupe/Roadster Finned Differential Mounting Plate 33-11-2-228-335-M9 ///Mcoupe Differential plate mounts and aligns perfectly with Medium Case differentials. NOTE: Rear driveshaft was removed due to other complications, this is NOT required for the differential swap. E28 Output Flange on the left, E36 Compact on the right. There is a difference in length but nothing to be worried about. You must use the E36 compact output flanges if you wish to reuse the E36 compact axles. They will NOT bolt to the E28 flanges.