Quote:
Originally Posted by mb0686 Well I think I figured it out based on step 11 of this Z3 clutch replacement guide https://webspace.ringling.edu/~dplassma/cj/cj.html I was using the E36 clutch replacement guide on PelicanParts which got me confused. So the starter should be unbolted at this point but I still can't get the bell housing to separate more than about an inch though. Sent from my Pixel 3 using Tapatalk |
I found this DIY from Pelican:
https://www.pelicanparts.com/BMW/tec...ch_Replace.htm It is not 318ti specific but it is for the E36.