why did the headgasket go? did it overheat or just did?? You might have to check if you head is warped.. Its not that bad just make sure your at TDC when removing the head. the cam tool locks the cames so you can put the chain on. and the flywheel lock( its just a pin) __________________ HIOP TWINSCREW w/aftercooler water to air, 3.73 lsd,ported headdone,performence valve springs w/titanium retainersinstalled..nitrous kitinstalled fun fun X brace installed5th injector w/ piggyback controler, high flow cat |