318ti.org forum - View Single Post - What's missing from my transmission tunnel?

HotChickenStrips · 10-31-2013, 09:19 PM

I had the same problem, that heatshield is held with 4 screws on the lower portiuon, but over time the shield loses rigidity and sags, I used two small self tapping screws and big washers on the upper portion.

10-31-2013, 09:19 PM	#2
HotChickenStrips Junior Member Join Date: Jul 2013 Location: Houston Texas. Posts: 26 iTrader: (0) Photo Gallery	I had the same problem, that heatshield is held with 4 screws on the lower portiuon, but over time the shield loses rigidity and sags, I used two small self tapping screws and big washers on the upper portion.