Quote:
Originally Posted by Johjamkep  I found SRS Concepts, they make brake adapters that allow you to use E46 rear brakes (294mm) and retain the stock e-brake. Since I'm building a street car I am going that route. I will be looking into some beefy axles now though.
Sent from my iPhone using Tapatalk |
Okay cool, I got the same set, I think you are going with 1series rotors though for 300mm instead of e46 rotors, the calipers are from the e46 though.
I am going with e46 325/328 calipers/rotors all around except for the rear which will have the adapter for 300mm rotor - front is also 300mm, it should be well balanced and the MC for the 318ti stock is very similar to the stock e46 one so pedal pressure/feel should be fine too. (My car is just m52 swapped ti, daily/street car)