Greetings All,
I'm in the final stretch.
I have a no start issue with my swap.
All parts are known to be good / running / operational from their donors.
S52 with OBD-1
1998 318Ti
Engine does not attempt to turn over on key in start position. No solenoid click, nothing
I don't hear the fuel pump on either.
All the electrical seems fine with the exception of the windows, they only work with the key in the aux / accessory position.
I cut the #7 green wire on the chassis side of the engine harness plug, X20, no difference.
Computer is a 413.
Will the manual enable me to get out of the woods?
I consider myself to be competent with this kind of work.
I've swapped a m20 into an e21 and a M50 into an E30, plus other fun...
Thanks |