View Single Post
Old 04-21-2011, 11:50 PM   #9
blowin 4
Senior Member
 
blowin 4's Avatar
 
Join Date: Feb 2009
Location: san jose
Posts: 425
iTrader: (0)
Default

Quote:
Originally Posted by blowin 4 View Post
i have a new sensor i even put the old one back tested both so far i have 15 hrs of tryin to get this car to tune at idle and not flood even straced the wires to the ecu pulled my injector rial cranked over car injectors shot gas like a rain fall i have to pull the fuel relay just to get it started ..it idles good not rich and if i go to the software shut down the injectors they still pulse at start up .when i install ware chip it will start 7 out of 10 times but will still flood but not as bad . barrie says i have a bad laptop cause i cant get trace to work and we both ttied reinstalling the software i give up putting it back to stock and see if that problem gos away..
just put my stock injectors and afm car couldnt have ran any better .. im going to try in tune it with stock afm if it works good by maf ...my main problem it that theres no way to adjust start injector pulse ...car idles great pulls like crazy just that flood problem when hot.
blowin 4 is offline   Reply With Quote