my car is a 323 ti but the master cylinder is the same as 318 ti and rear break too i use the oem master cylinder but i have completly removed the ABS systeme bloc i have invert the exit of the master cylinder ( rear exit to the front line and front exit to the rear line ) and put a manual limiter for the rear because without this I had just a little too many brakes to the rear with a bigger M C like yours, the pedal lenght is shorter and harder than with a oem but i dont really know why you dont have enouth break to the rear which pad did you use ?? mine are pagid rs 4.4 for the front and blue EBC for the rear Last edited by samdemange; 04-19-2015 at 11:00 PM. |