Quote:
Originally Posted by spidertri I've read, never tried, that you can try to spray some WD-40 on the oring and it will help release the grip the oring has on the bore. Some people say it will pop right out if you can pull a bit and spray right on the gap. I'd thread two of the bolts in so when you finally get it it doesn't fly out and smack the radiator. |
Thanks for the reply! I'm doing that very thing but with some Kroil. Letting it soak overnight. Ran to Lowes and picked up a few things. Will give it another go tomorrow and try the slider/breaker that I'm rigging up. Until then it's a nice little pour of Gentlemean Jack and kicking back in the recliner.