View Single Post
Old 02-26-2018, 07:43 AM   #9
Estii
Senior Member
 
Estii's Avatar
 
Join Date: Nov 2014
Location: California
Posts: 215
iTrader: (0)
Default

After a moderate amount of work, my modification was a success!!! The shift lever is comprised of 2 sections with 3 components. Upper section ( where knob mounts), lower section ( where selector rod mounts), and a chubby rubber buffer ( purpose unkown). After reducing 1" from both stock ti lever, and M coupe lever, the reduction in throw is noticable, and i found no increase in shifting effort. If any effort was added it is negligable. If planning to perform this modification to a stock ti lever, I highly suggest purchasing an M coupe or S50 lever. Even after modification the throws are still ridiculous on the stock Ti lever. Ill create a seperate post with the complete step by step procedure.


Sent from my iPhone using Tapatalk
Estii is offline   Reply With Quote