318ti.org forum - View Single Post

**cooljess76** · 02-25-2011, 11:41 PM

I'd get under there and take a look for yourself. It might just be the center support bearing or flex disc(guibo) going bad. If it is in fact your ujoints, you could easily pick up a rebuilt one or even a used one for dirt cheap. Most automotive machine shops will balance a shaft for a small fee and I would imagine that they could rebuild one for a little more. Figure your old one lasted 276k miles, a used one off a car with 100k miles should have a lot of life left in it.

02-25-2011, 11:41 PM	#5
cooljess76 NOBODY F's with the Jesus Join Date: Oct 2006 Location: Ventura California Posts: 7,824 iTrader: (6) Photo Gallery	I'd get under there and take a look for yourself. It might just be the center support bearing or flex disc(guibo) going bad. If it is in fact your ujoints, you could easily pick up a rebuilt one or even a used one for dirt cheap. Most automotive machine shops will balance a shaft for a small fee and I would imagine that they could rebuild one for a little more. Figure your old one lasted 276k miles, a used one off a car with 100k miles should have a lot of life left in it.