I thought I might share a quick mod and document it for those who might be searching.
This is a quick and painless mod to delete those unsightly amber turn signal's, and allow for the crisp halo's and HID to bling! You still have the blinker's and Hazards functionable and working.
I realize you can do the elec. tape mod on the bulb or get into fuse box to acheive this look. IMO, this is sooo much easier and safer.
Est time: 10-15 min.
Tools: 1. Small flathead 2. Electrical tape 3. Zip-tie optional
The wire you are disconnecting is the hot wire(gry/ylw-pass side & gry/violet-driver side) for both sides. This is the same wire that you spliced your AE's into which allow them constant power with the running lamp assembly. Also FYI...I already had my AE's splice into hot wire, do not eliminate this connection or your AE's will not have power.
Other than that, pretty simple and effective outcome! Enjoy and best of luck!
