View Single Post
Old 11-24-2017, 09:43 PM   #3
Tampa Brad
Junior Member
 
Join Date: Nov 2017
Location: Tampa
Posts: 3
iTrader: (0)
Default

You're right Paul, allot going on. Based on my tests so far I have come up with the camshaft position sensor as my main problem. If replacing that part gets her to start I'm going to test for a bad head gasket and replace that, if it's bad. Also fix all the cooling issues, again assuming it starts after the new sensor. Any tips of advice would help. Or if there is something else I should replace while I have her torn down to the heads.
Tampa Brad is offline   Reply With Quote