if you are wondering where to put the posts, there are little indents that mark one corner of the post. another thing you can do is put the posts in their mounting spots (use some double sided tape) and then put 3M double sided tape on the backs of the posts. then put the door panel into mounting position and then remove it. the post should be stuck in their proper place. then mark the corners of each one and glue them down (then fiberglass, thats what i did)
good luck! __________________
'74 2002ti (Departed)
'82 320is (Departed)
'87 535i (+360k Departed :'( )
'88 535is (200k en-route to being reitred)
'98 318ti (150k Active)
'04 330ci (Newest Member) |