Okay, here's one new observation--the stock exhaust actually comes in contact with the axle housing--sometimes I hear a rattle, sometimes not, which means axle housing takes a different position over every bump. A weekend rebuild of the rear suspension is in order. Please help with creating a parts/tools list: Remember, I'm still shooting for OEM MOST of the way. I have seen on another forum how to remove the subframe bushings without removing the axle shaft housing and how to fabricate the tool to do it. (Hope I marked it). I'll see about procedure as I accumulate parts and tools. For the weekend rear end rebuild I already have: oem style shocks, mounts, and bolts. one jack and set of stands So I need: another jack and stands rear subframe bushings left and right rear trailing arm bushings left and right stabilizer brackets and links, and bushings (they have a little rot and wiggle) How about dimensions for the left rear trailing arm, so I can check it by measuring to see if it's bent or not? And what else? |