All E36 skirts are the same length, so you should be able to install them. I have a '95, and I just installed non-M skirts on it. The OEM skirts are mounted using plastic clips that snap into holes drilled in the sheet metal. Recreating this on a car that doesn't have the holes is kind of tricky - what I wound up doing is putting some plastic shims between the skirt and the body, and fastening everything with Windo-weld. It'll mean a lot of hassle if I ever have to replace a fender, but I can live with that. (The shims were necessary because I didn't have the plastic clips.) |