View Single Post
Old 09-22-2009, 11:48 PM   #45
marko
Senior Member
 
marko's Avatar
 
Join Date: Mar 2005
Location: NJ
Posts: 1,625
iTrader: (2)
Default

good luck - sounds good. boost is really the trick! my car, though still with some stuff to ironed out, is like nite & day compared to what it was when I got it.

anything past 10 psi & that 2.25 inch exhaust will make a difference, too. Believe it or not, I'm actually going custom route & will be getting the 2.5 inch wiht a Magnaflow back box soon! LOL


Quote:
Originally Posted by Jean H.318TI View Post
well as some of u guys know i always wanted to turbo my lil TI but never really have some1 with a good tunning but now that johnboy is done with his turbo and running good im gonna get on this and start the turbo build, is not gonna be even close to what johnboy have but is good for me.

gonna use the same OBX turbo manifold
HKS Super SQV
TIAL wastegate 44mm
MITSUBISHI turbo T3
HKS turbo timer
27"x7"x2.5" intercooler delta fin 2.5" in/out. - black
2.5" intercooler piping - black,
Silicone hoses black
Heavy Duty Spring Loaded T-Bolt Clamps
Turbo Oil Scavenge Pump
electronic boost controller (not sure what brand)
Lucas 42.8# Blue Strip injectors
Injector adaptors (Metric)
M3 MAF sensor
2.5" > 3" boot to connect new MAF in system.
Co2 intercooler sprayer (no tune) just to help with the heat soak on hot days or before/after a run on the track/street
and all the other random stuff like the oil/water lines and everything else

and im also gonna run with open wastegate, so is gonna be super loud (only WOT) lol

is gonna take few months until i get all the parts, i already order some of the stuff tho, so maybe by winter or before we are gonna have another turbo TI and im only gonna run 14psi tops and 8psi DD (shooting for 200+whp @14psi)

cant wait for this to be done but money is kinda low, around 400month to spend on this so yeah is gonna take some time, any donations are welcome
__________________
http://i254.photobucket.com/albums/hh98/damiennn666/318ti5-1.jpg?t=1217269847
SOLD!SOLD!SOLD!SOLD!SOLD!SOLD!SOLD!SOLD!
Metric Mechanic's 2.0 stroker/258' intake cam/42 lb. inj./remap/HD fuel pump
/DASC w.3' pulley @ 15psi/SNOW System/3.45 LSD/Billstein PSS coils
/Stromung Exhaust/DS1's/X-Brace/Front & Rear H&R Sways/OMP 300mm SW
/SAP delete/ASC+T delete/Hayabusa valve springs/MM's LTW flywheel
marko is offline   Reply With Quote