checked inj output. signals ok. pulled the plugs, they look like hell, so i went ahead and replaced them. still no start. after some thinking...i got fuel, spark and compression...no reason it would'nt run. ran a vac check, it was low. more thinking... pulled a 02 sensor and cranked it. it fired right up, exsessive back pressure caused by clogged/ broken cat. put sensor back in, starts, stumbles and dies, then no start. pull o2 again, cranks right up after purging cyl. so a plugged cat it was. thought i would post my findings after reading for hours different thread...only to find no answer!! |