Depending on what order thing happen with my car could take awhile. Right now im also designing and looking to fabricate a full tubular frame along with looking at moving out the front and rear wheels for a true wide body. For the rear im designing custom spacers for where the diff couples to the axle, fully supported with bearings, and well the fronts the easy one just extend the tie rod. Ill also be changing the entire suspension to double wishbones with progressive neg camber and it will be digitally adjustment ride height system i make so i can raise or lower the car. The range is either 3 or 6 inches depending on which i choose, ive installed the system in a few track cars before. |