anyone? i have connected the wires 1 and 3 that go into the ews unit.. ones comes from the ignition and other from the starter motor area.. it just bypasses the starter part of the ews not the whole lot.. basically i crank the key and still nothing but the starter is fine when i short the cables out :S ahh god! i could of got a wire mixed up when puttin loom back on but im pretty sure i havent.. i connected the red alternator cable to the chun starter terminal aswell as connecting the chunky red one from the battery to the same terminal.. then i connected the blk/grn and blk/yel wires to the starter , they only fit in one place for eachof them because the blk/yel is larger.. oh an i also attached the red wire coming off of the chunky red battery cable to the side of the fuse box on that gold terminal .. as far as i can see thats everything to do with the starter and seem to all be in the right place here.. if anyone knows anything different please say.. |