318ti.org forum - View Single Post - 6 Cyl Swap

**AnotherPotatoChip** · 03-09-2022, 07:41 AM

Hey Jim - Just FYI the cutout I made for the Supersprint is left-aligned with the single cutout of the original 318ti rear valance. I left the single cutout intact and just extended it right to double the size. I would think the 323ti rear valance would end up being in the same place? Hope it works out for you!

03-09-2022, 07:41 AM	#3
AnotherPotatoChip Junior Member Join Date: Oct 2021 Location: Seattle, WA, USA Posts: 13 iTrader: (0) Photo Gallery	Hey Jim - Just FYI the cutout I made for the Supersprint is left-aligned with the single cutout of the original 318ti rear valance. I left the single cutout intact and just extended it right to double the size. I would think the 323ti rear valance would end up being in the same place? Hope it works out for you! Attached Thumbnails __________________ Bimmers: 90 325i, 96 318ti (330ti), 02 530i Beemers: 93 K75s, 96 K1100RS SE Jeeps: 01 Wrangler TJ 4.0L, 19 Wrangler MOAB 3.6L