View Single Post
Old 04-25-2019, 12:53 AM   #3
jerseytim
Member
 
Join Date: Jun 2016
Location: jersey
Posts: 74
Vehicles
iTrader: (0)
Default

i did this about 4 years ago and used the 316i clutch, flywheel and gearbox. it was in a rally car for a while and has been used in auto tests, auto-solos, hill climbs, sprints always starting in second gear and being totally abused. The clutch started slipping and i replaced it last week for another 316i clutch as i was really impressed that it lasted so long. The 316i clutch is the same as the 318ti clutch so i would keep what you have. don't forget to take the bearing out the end of the manual crank and fit it in the auto crank as it won't have one.
if you are interested this is one i did a few weeks ago (fitting a 328i using the 318ti clutch and flywheel)
https://youtu.be/-l2C0egaIlk
jerseytim is offline   Reply With Quote