Yea, when I rebuilt my jeep engine the builder assembled it for me I installed it and he had degreed the cam originally, but after I got it running he fine tuned it and it made a nice gain. (5hp) We did this trying to slide as close as possible to the peak power and still pass emissions testing.... Of course on the M42/M44 engine its hard to say how deep he needs to get to get at the cam drive sprockets. You might need new cam gears to truly adjust it... Which I would only do if I was putting in a new cam... Sometimes it just takes offset keys to get a cam "in". Dave __________________ Dave - PDX 1995 318ti - Active Black and Tan. 2005 330xi - Mtech 1 - 6spd - Orient Blue/Black |