318ti.org forum - View Single Post - Custom M44 Eaton Supercharger Build-- Long Overdue

TheDude · 01-13-2015, 07:15 PM

Now that the manifold is figured out, I had to decide on a bracket design. The final design came out to be a piece of plate steel floating on a Unistrut Rail which involves the use of 2 pieces of Unistrut welded together and bolted to the existing M44 intake manifold bracket (unused with the E30 manifold). This rail sits on the Alternator. This will allow me to adjust the Supercharger to ease any belt problems. The pictures only show, the rail.

01-13-2015, 07:15 PM	#6
TheDude Member Join Date: Jan 2015 Location: Plano, TX Posts: 35 iTrader: (0) Photo Gallery	Now that the manifold is figured out, I had to decide on a bracket design. The final design came out to be a piece of plate steel floating on a Unistrut Rail which involves the use of 2 pieces of Unistrut welded together and bolted to the existing M44 intake manifold bracket (unused with the E30 manifold). This rail sits on the Alternator. This will allow me to adjust the Supercharger to ease any belt problems. The pictures only show, the rail.