Thanks JohnBoy! I have to keep reminding myself to take photos of my progress on small parts and pieces.
Continued:
Heres the start of the intercooler pipes, the inlet to the supercharger i ended up using the stock mercedes manifold......modified of course, i chopped it short ground it down and stuck some RTV silicone around it and squeezed on a 90 degree silicone connector. I also drilled a hole in the back of the manifold for the Bypass valve to reroute idle air to the Intake Manifold.
This is an overview of the engine bay with *Most everything hooked up.
Here's a close up of the Manifold inlet, it is connected to the cold side of the Intercooler. The Bypass valve air comes in the connection on top.....(yes thats a pvc hose, i am still looking for a 1" rubber hose....
The picture sucks, but you might be able to see it.