I plan on running the Throttle body behind the driver headlight. The stock Throttle cable does not fit, so i had to use an aftermarket JEG's unit, 48" and had all the hardware for $25. Easy to install, just remove the old cable and remove the firewall plug. The Jegs unit has a threaded pipe that the cable goes through and clamps the firewall with nuts.
Then i had to lengthen the wiring for all of the sensors <MAF, TPS and ICV> I added an extra foot just in case, because it would suck if i had to modify a design and rewire the harness again......
Thats about as far as i am now, I have the intercooler installed, and i installed a vacuum manifold to clean up all those hoses. I do have to weld a custom pipe to connect the intercooler to the intercooler pipes (the pipe kit i bought did not have the materials to make the turns i had to have.