Did you reverse your black wires? If you shorted 1 to 2 or 1 to 4 to test if starter works.
You need someone to turn the key to the start position while you check for 12 volts on one of those small black wires thst is only 12 volts when key is in the start position.
I think you already did the short test and the starter worked so which ever pole shorted to center is you start solenoid pole and you want to connect the black wire that is 12 volts with the key in the start position to this pole. If you have no 12 volts on either black wire when in the start position then EWS or something like a alarm is not allowing the 12 volts to the starter energize pole. For now just the basics and then start bypassing items on ews it we can't get through these checks listed above |