318ti.org forum - View Single Post - NEED HELP: Installing Engine/Motor Mounts & Need to Move Engine

**cooljess76** · 09-20-2008, 05:40 PM

Make sure that you didn't crack your oil pan. It's generally not a good practice to jack an engine up from the oil pan because it's made of aluminum and is not designed to support the weight of the motor. If you used a block of wood to even out the load, you should be okay, however jerking it from side to side while it's suspended is not a good idea. I agree with angel in that a engine hoist is the best route. Even if you only lift it using the front eyelet, you should still be able to maneuver it enough to replace the motor mounts.

09-20-2008, 05:40 PM	#3
cooljess76 NOBODY F's with the Jesus Join Date: Oct 2006 Location: Ventura California Posts: 7,824 iTrader: (6) Photo Gallery	Make sure that you didn't crack your oil pan. It's generally not a good practice to jack an engine up from the oil pan because it's made of aluminum and is not designed to support the weight of the motor. If you used a block of wood to even out the load, you should be okay, however jerking it from side to side while it's suspended is not a good idea. I agree with angel in that a engine hoist is the best route. Even if you only lift it using the front eyelet, you should still be able to maneuver it enough to replace the motor mounts. __________________ 4 MORE YEARS BABY!!!