[KASZ]

Hey all, I am scratching me head over here.

So I started my car after having it sit for a while during the lockdown. I depress the clutch and start it. Runs fine, everything is good. I try to shift into gear... and i cant. Engine bogs down a bit but just cant get it into gear.

I turn off the car. and the stick goes into every position smoothly without a hitch. So i pump my clutch a bit, and I cant remember but it think it felt softer. still no luck. Car moves in gears forward and reverse fine, because i got it up on ramps right now. But in the sequence of car off, shift, car on, move. car off, shift and so on.

So i ordered both a master and a slave. So far I replaced the slave. Got it on, and i cant bleed the damn thing. No fluid is coming out at all. I used a brake bleeder to suck the air through the valve. Not going at all. Pumped the clutch, nothing, no fluid is going down. Even pumped the slave and undid the valve simultaneously, still no fluid coming out.

My guess is there is something up with the master, that's not allowing for suction. Clutch pedal has no resistance now at all. no pressure at all. Thoughts?