318ti.org forum - View Single Post - What tools do i need to install the left and right control arms

b-rad · 08-07-2009, 07:34 PM

Ball joint remover (aka pickle fork), a good 1/2in drive metric socket set(I prefer 6 point), 1/2in breaker bar. Optional: torque wrench.

08-07-2009, 07:34 PM	#2
b-rad Senior Member Join Date: Jul 2008 Location: Sacramento Posts: 245 '08 Surly Steamroller '95 BMW 318ti Base iTrader: (1) Photo Gallery	Ball joint remover (aka pickle fork), a good 1/2in drive metric socket set(I prefer 6 point), 1/2in breaker bar. Optional: torque wrench.