View Single Post
Old 09-02-2007, 02:53 AM   #7
deci
Junior Member
 
Join Date: Aug 2004
Location: san diego
Posts: 18
iTrader: (0)
Default

Well still no luck. (or I should say only a little luck)

The first thing I tried was to unplug both turn signal lights. The fuse did not blow so I thought I may have got it figured out. I then plugged in the passenger side turn light only. Fuse was still ok. So I plugged in the driver side light and it blew the fuse. At this point I was sure I had found the problem, but after cleaning up some potential trouble areas in the wire, fuse still blew. For sanity sake, I tried it again with both lights unplugged. Fuse still blows.

So now I am back to square one. Does the fact that the fuse still blows even though these lights are not connected mean that the trouble is definitely elsewhere?

I keep reading that I should check the grounds but where exactly are the grounds for these systems? I can only find one of them and that one seems fine.

And what exactly should I be looking for on the grounds that would say something is wrong?

I'm pretty lost here and am about to give up. Anyone know how much it would be to get a mechanic to fix this?
deci is offline   Reply With Quote