View Single Post
Old 04-22-2008, 06:17 AM   #12
clex2
Senior Member
 
clex2's Avatar
 
Join Date: Nov 2003
Location: Walnut Creek, CA
Posts: 642
iTrader: (1)
Default

CirrusSR22,

you're right. I just check the throttle body and there is a two stage spring mechanism. Mine kind of sticks if you stop between the two stages and I have felt it through the pedal itself. I may have to try to "rebuild" the mechanism to get rid of the stickiness. However, those with a manual, can you guys check your throttle body action for the two stages? Realoem states only one trhottle body part number for auto and manual.
__________________
'95 330ti CS w/sr delete, S50USB30, cams, 24# inj, Conforti SW, Euro HFM, Samco Silicone Intake Boot, BBTB, Euro Oil Cooler, JTD CAI Duct, RE DMS exhaust, RE Tranny mounts, CF Valve Cover, LTW flywheel/Kevlar sprung hub clutch, RE SSK, 3.46 Finned LSD (M6) , M3 tranny, Brembos, RE Wheel Studs, SS brake/clutch lines, CF interior, Rear Headrest retrofit, Tilt Steering retrofit, 13.5 lb DynaBatt in rear, LED interior/footwell lights, ZKW HID, Headlight Aim Control, Rear fog light w/cluster indicator, CF 3 Aux gauge pod, BMW Traffic Pro/Alpine MP3-CD Changer, Staggered LTW wheels, '95 M3 steering rack, VIS CF Hood, M3 LTW Strut Bar, TCK SA coilovers, Red LTW Motorsport Seatbelts, OEM Fire Extinguisher, Z8 Starter button, Auto dim rear view mirror w/ Homelink/Compass, PDC, Rear Sun Shade, Euro Gauge Cluster w/oil temp/shift light , Headlight Washers, "Motorsport" Door Handles, CF Grills, French ZKW Fogs, Euro dash bins, Power Lumbar Support is next, Coming e39 M5 interior light, Bimmer Magazine 8/2007
clex2 is offline   Reply With Quote