View Single Post
Old 04-19-2011, 03:24 PM   #9
xxxJohnBoyxxx
Senior Member
 
Join Date: Dec 2007
Location: Gulfport, Florida
Posts: 3,208
iTrader: (1)
Default

Engine temp sendor. If this is bad and tells the DME the engine is cols all the time is will be a bear to start when warm. I had this issue when my sensor was unplugged and it took like 30 seconds of cranking or more to start my car when it was warm. Bad temp sensor or unplugged will cause starting issues like you are having.

Unloader relay on my car is located in with the DME. It is the only relay in the DME compartment. When you crank your car all accessories should turn off until your done cranking...
xxxJohnBoyxxx is offline   Reply With Quote