Thanks for the reply. Yes, It is still in the air but since the 323is donor is still around, I was able to grab the front sway bar off of that. The 318ti M Sport is a 26mm bar and the 323i (Non M Sport) is only a 24mm sway bar. BTW anyone interested in a 26mm M sport front sway bar? Let me know. Or if anyone has a 25.5mm M Sport 325/328/323 front bar, I'd be interested. Now I am moving on to figure out what shift linkage will work. My 318ti has what looks like a harmonic balancer on the drive shaft and it hits the shorter straight shift rod from the 323 and the 318 shift rod is too long. I need to figure out if I need a different rod, use the front section of the 323 drive shaft with out the balancer or put a bend in the rod for clearance. __________________ 98 318ti MSport M52, 88 M3, 97 M3/4 |