Quote:
Originally Posted by marko I use 3922s as per ur suggestion, and are doing fine... no issues. However, my AFR reads 16.5 at idle, and goes down to high 14s to low 15s when I'm really on it. Am I too lean?! Max boost is 14-15, as per the gauge... Meth is set to start at 6psi, and full flow at about 13. Plugs look white-ish, when I pull them out. What am I doing wrong? Do I go higher with the meth, or lower?? |
yeah thats way to clean your going to melt stuff i ran 11.9 with my charger and never had a problem . ppl say the white is from different gas but if you ask me its from leaning out cuz i was runing lean on 91 pump gas and my plugs are white i set it to 11.5 and now they look like normal plugs..