318ti.org forum - View Single Post

CirrusSR22 · 11-20-2010, 02:32 AM

I'll give the HVAC panel a shot (from memory):

• Remove the radio
• Remove the clock (or OBC)
• Once those are out, you should find two screws in the openings. The screws are at the very top of the panel and are facing upwards.
• Pull the three HVAC knobs off. Behind those are two screws that hold the panel to the HVAC control assembly. Remove the screws.
• The panel can now be removed. Tip the top of the panel away slightly and lift upwards. The bottom of the panel is attached by two downward pointing hooks (hence the need to lift it almost straight up.
• Once the panel is off the bulb is exposed.

Here's the diagram. Part #61138353797.
http://www.realoem.com/bmw/showparts...99&hg=64&fg=20

11-20-2010, 02:32 AM	#6
CirrusSR22 Senior Member Join Date: Nov 2004 Location: Minneapolis Posts: 1,587 iTrader: (3) Photo Gallery	I'll give the HVAC panel a shot (from memory): • Remove the radio • Remove the clock (or OBC) • Once those are out, you should find two screws in the openings. The screws are at the very top of the panel and are facing upwards. • Pull the three HVAC knobs off. Behind those are two screws that hold the panel to the HVAC control assembly. Remove the screws. • The panel can now be removed. Tip the top of the panel away slightly and lift upwards. The bottom of the panel is attached by two downward pointing hooks (hence the need to lift it almost straight up. • Once the panel is off the bulb is exposed. Here's the diagram. Part #61138353797. http://www.realoem.com/bmw/showparts...99&hg=64&fg=20 Last edited by CirrusSR22; 11-20-2010 at 02:34 AM.