Some differences Thanks, That basically worked for me. I would stress the don't force anything. I found the cluster was a tight squeeze, so I needed to remove the bezel as well. To do this I had to remove 2 additional screws behind the bezels for the light switches. Also and I had to separate the light switches from the bezel by pressing in on a tab on each. This leaves the light switches wired up but out of the bezel. I did the same with the indicator bulbs for the lights. Then I had 3 connectors with the lever to undo on the back of the cluster. Everything else was as you said. This is on a 98 ti with sport package. |