Thread
:
Wisco Touring International
View Single Post
04-25-2013, 11:05 AM
#
163
Earl
Senior Member
Join Date: Mar 2012
Location: West Bend, Wisconsin
Posts: 1,055
Vehicles
1995 BMW 318ti Sport
'95 BMW 318ti
iTrader: (
2
)
Photo Gallery
I got another little chunk of work done yesterday. I wanted to smooth out all of the old bracket mounting points. I grabbed a 120 grit flap wheel and went to town.
I then got most of the seam sealer finally removed from the corners. Some of it is still in that very tight corner. I think I'll need to use a pick to get that out.
I then put the subframe bushings in.
I went to put the trailing arm bushings in and ran into a snag. I got the end with the sleeve pressed in with the help of a hammer, but I could not get the other end to come in any farther than pictured=( I didn't happen to have a c clamp handy, so I will be using one today to get them fully seated.
I will be going to the shop today after work, and also on Sunday. I'll post the updates Monday=)
__________________
95 318ti & 96 318ti
Quote:
Originally Posted by
eurohb
Im Jelly.. enough said.
Follow me on instagram: earlmeyeriii
Earl
View Public Profile
Send a private message to Earl
Find More Posts by Earl