318ti.org forum - View Single Post

Panzer_M · 01-21-2005, 09:31 PM

could you give me a write up on it, with a few more details to it.
I will try this in the garage.

So far I've replace
50 clips
1 window
1 motor(blew out)
and 1 regulator arm when I first got the car
and now the current arm is slightly bent, but I can fix it with some pulling and a C-clamp.

I am at the point of buying a new door assembly from BMW and going to a bodyshop to hopefully fix this problem premently.

01-21-2005, 09:31 PM	#45
Panzer_M Senior Member Join Date: Feb 2004 Location: Port St. Johns, Florida Posts: 2,242 iTrader: (0) Photo Gallery	could you give me a write up on it, with a few more details to it. I will try this in the garage. So far I've replace 50 clips 1 window 1 motor(blew out) and 1 regulator arm when I first got the car and now the current arm is slightly bent, but I can fix it with some pulling and a C-clamp. I am at the point of buying a new door assembly from BMW and going to a bodyshop to hopefully fix this problem premently.